19 19 461300 -- N32 No_Module FC
20 20 461400 -- N32 No_Module FC
21 21 461500 -- N32 No_Module FC
22 22 461600 -- N32 No_Module FC
23 23 461700 -- N32 No_Module FC
<Output truncated>
Configuration backup
Always keep a backup copy of your configuration files. You can use these backup files to restore your configuration when needed. Dell EMC
recommends backing up the configuration regularly to ensure that a complete configuration is available for downloading.
The following recommendations apply:
•
Keep backup copies of the startup configuration for all switches in the fabric.
•
Upload the configuration backup copies to an external host or an attached USB device.
•
Avoid copying configuration files from one switch to another. Instead, restore the switch configuration files from the backup copy.
Backup procedure
To back up the switch module configuration to an FTP server:
1
Open a TELNET session to the serial console.
2
Enter the
configUpload
command.
You are presented with a series of prompts.
3
Follow the prompts to upload the configuration.
The
configUpload
command uploads the switch configuration to the server, making it available for downloading to a replacement
switch module, if required.
Initial setup and verification
33
