Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
2. Route the speaker cable through the routing guide on the assembly inner frame and palm-rest assembly.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
.
After working inside your computer
.
System board
Removing the system board
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
8. Remove the
.
9. Remove the
.
10. Remove the
.
11. Remove the
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Removing and installing components
47
Summary of Contents for Latitude 5420
