Installing the LCD panel
1. Connect the eDP cable to the system board [1] while holding the cable and close the actuator on the connector [2].
2. Stick the tape on the connector [3] securing the eDP cable to the LCD panel and flip over the LCD panel to rest on the LCD back
cover [4].
3. Align the LCD panel to the back cover [1] and install the four M2.0x3.0 screws to secure the LCD panel to the LCD back cover [2].
78
ការលោះលប្រងង
និងែំលែប្ងលប្រងងលែប្ងែិញ
Summary of Contents for Latitude 3300
