5. Reconnect the battery cable to the connector on the system board.
6. Install the:
a)
b)
7. Follow the procedure in
After working inside your computer
.
Coin Cell
Removing the coin cell
1. Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
3. Disconnect the battery cable from the connector on the system board.
4.
CAUTION:
Back up the data before removing the coin cell. Removal of the coin cell resets the BIOS and may cause
No Boot, No POST, or potential loss of data.
Disconnect the battery cable from its connector on the system board [1].
5. Lift and remove the coin cell from the system [2].
NOTE:
A strong adhesive is used on the coin cell; a bit of force is needed to peel the battery from the palmrest.
36
ការលោះលប្រងង
និងែំលែប្ងលប្រងងលែប្ងែិញ
Summary of Contents for Latitude 3300
