Dell EMC Inspiron 3671, Service Manual

Page: 37 / 73

Removing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Procedure
1. Disconnect the optical-drive data cable and power cable from the optical-drive assembly.
2. Remove the two screws (M2x2) that secure the optical-drive assembly to the chassis.
3. Slide and remove the optical-drive assembly from its slot on the chassis.
4. Insert a pin into the optical-drive emergency eject pinhole to release the optical-drive tray.
5. Gently pull to open the optical-drive tray from the optical-drive assembly.
6. Using a plastic scribe, push the tabs to release the optical-drive bezel from the optical drive.
7. Gently pull and disconnect the optical-drive bezel from the optical drive.
24
Removing the optical drive 37