Dell EMC Inspiron 3493 Service Manual Download

Page: 51 / 87

Replacing the system board

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

NOTE:

Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup

program after you replace the system board.

NOTE:

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You

must make the appropriate changes again after you replace the system board.

Procedure

1. Align the screw hole on the system board with the screw hole on the palm-rest and keyboard assembly.
2. Replace the screw (M2x4) that secures the system board to the palm rest and keyboard assembly.

Removing and installing components

Summary of Contents for Inspiron 3493
























































































Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands

Dell EMC Inspiron 3493, Service Manual

Search results

Summary of Contents for Inspiron 3493

Reviews:

Related manuals for Inspiron 3493

Brands by name

Popular brands