manualshive.com logo in svg

Dell EMC Generation 6, Installation Manual

Share
Download
Dell EMC Generation 6 Installation Manual Download Page 23

Press the selection button to set CPU speed to 100%.

Read-Only

Press the selection button to set node access to read-only.

Read-Write

Press the selection button to set node access to read-write.

UnitLED On

Press the selection button to turn on the unit LED.

UnitLED Off

Press the selection button to turn off the unit LED.

Shutdown menu

The Shutdown menu allows you to shut down or reboot the node. This menu also
allows you to shut down or reboot the entire cluster. Press the up or down navigation
button to cycle through the four shut down and reboot options, or to cancel out of the
menu.
Press the selection button to confirm the command. You can press the left navigation
button to back out of this menu without shutting down or rebooting.

Update the install database

After all work is complete, update the install database.

Procedure

1. Browse to the 

Business Services

 portal.

2. Select the 

Product Registration and Install Base Maintenance

option.

3. To open the form, select the 

IB Status Change

 option.

4. Complete the form with the applicable information.

5. To submit the form, click Submit.

Where to go for support

This topic contains resources for getting answers to questions about Isilon products.

Online support

l

Live Chat

l

Create a Service Request

For questions about accessing online support, send an email to 

[email protected]

.

Telephone
support

l

United States: 1-800-SVC-4EMC (1-800-782-4362)

l

Canada: 1-800-543-4782

l

Worldwide: 1-508-497-7901

l

Local phone numbers for a specific country are available at 

Dell

EMC Customer Support Centers

.

Install new Generation 6 hardware

Generation 6 Installation Guide 0

23

Summary of Contents for Generation 6


























Reviews:

No comments

Brands by name

Popular brands

Load more brands