Figure 124. Installing the M.2 SSD
9. Slide the BOSS S2 card carrier into the BOSS S2 controller card module slot.
10. Close the BOSS S2 card carrier release latch to lock the carrier in place.
Figure 125. Installing the BOSS S2 card carrier
Next steps
1. Follow the procedure listed in the
After working inside your system
on page 27.
System battery
Replacing the system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type That is recommended by the manufacturer. Discard used batteries according
142
Installing and removing system components