Figure 111. Installing the IDSDM module
Next steps
1.
.
NOTE:
Reinstall the Micro-SD cards into the same slots based on the labels you had marked on the cards during
removal.
2. Follow the procedure listed in
After working inside your system
on page 27.
MicroSD card
Removing the MicroSD card
Prerequisites
1. Follow the safety guidelines listed in the
on page 26.
2. Follow the procedure listed in the
Before working inside your system
3.
.
Steps
1. Locate the MicroSD card slot on the IDSDM module, and press the card to partially release it from the slot. For more
information about the slot location, see
System board jumpers and connectors
2. Hold the MicroSD card, and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with the corresponding slot number after removal.
Installing and removing system components
133
