Initializing the TPM 1.2 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3. From the
TPM Security
option, select
On with Preboot Measurements
.
4. From the
TPM Command
option, select
Activate
.
5. Save the settings.
6. Restart your system.
7. Enter
System Setup
again.
8. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
9. From the
Intel TXT
option, select
On
.
Initializing the TPM 2.0 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3. From the
TPM Security
option, select
On
.
4. Save the settings.
5. Restart your system.
6. Enter
System Setup
again.
7. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
8. Select the
TPM Advanced Settings
option.
9. From the
TPM2 Algorithm Selection
option, select
SHA256
, then go back to
System Security Settings
screen.
10. On the
System Security Settings
screen, from the
Intel TXT
option, select
On
.
11. Save the settings.
12. Restart your system.
Control panel
Removing the left control panel
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Disconnect the control panel cable from the system board connector.
NOTE:
Observe the routing of the cable as you remove it from the system.
2. Using the appropriate screwdriver, remove the screws that secure the left control panel assembly to the system.
3. Disengage the left control panel housing clip which is located on the bottom of the left control panel assembly.
4. Hold the left control panel assembly and remove it from the system.
76
Installing and removing system components
