manualshive.com logo in svg

Dell EMC DSS 9000, Installation And Service Manual

Share
Download
Dell EMC DSS 9000 Installation And Service Manual Download Page 48

Installing and removing system components

37

6

Installing and removing system components

Safety instructions

 

CAUTION: 

Many repairs may only be done by a certified service technician. You should only perform 

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online 
or telephone service and support team. Damage due to servicing that is not authorized is not covered by 
warranty. Read and follow the safety instructions that are shipped with your product.

System components and electronic circuit boards can be damaged by discharges of static electricity. 

Working on systems that are still connected to a power supply can be extremely dangerous. To avoid 

injury to yourself or damage to system, follow these guidelines:

• Wear a grounded wrist strap when working inside the system chassis.
• Handle electronic circuit boards only by the edges, ensuring not to touch the components on the 

board. Do not flex or stress the circuit board. 

• Store all components inside a static-proof packaging until you are ready to use the components for 

installation.

Recommended tools

• Phillips screwdriver #2

Service parts list

Table 34.  Service parts list 

Item

DSS 9000 System
Fan module
Power

• PSU
• PBPM

Summary of Contents for DSS 9000



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands