Dimensions and service area
This section provides service area and dimensions information.
Because DLm cabinets ventilate through the rear, you must provide adequate
clearance to service and cool the system, as illustrated in the next diagram.
Figure 9 DLm8500 cabinet dimensions and access area
GEN-001156
Height
76.66 in.
(194.7 cm)
Depth
41.88 in.
(106.4 cm)
Width
24.02 in.
(61.0 cm)
EMC
Disk Library for mainframe
cabinet
Rear access
42.00 in.
(106.7 cm)
Front access
42.00 in.
(106.7 cm)
EMC
Disk Library for mainframe
cabinet
Top access
18.0 in.
(45.7 cm)
Shipping dimensions and clearance requirements
DLm8500 VTEC cabinets have the same dimensions. This section provides the
dimensions, clearances, and placement of the VTEC cabinets.
See
Dell EMC PowerMax Family Site Planning Guide
for dimensions, clearances, and
placement of the PowerMax cabinets.
Data Domain Hardware Overview and Installation
Guide
provides corresponding Data Domain information.
Note:
Read the entire procedure before unpacking.
Ensure that your doorways and elevators are adequately wide and tall enough to
accommodate the shipping pallet and cabinet as shown in the following figure:
DLm8500 System Service Area and Removal
48
Disk Library for mainframe Physical Planning Guide for DLm8500