System weight
Table 15. Dell EMC PowerEdge R340 system weight
System configuration
Maximum weight (with all drives/SSDs)
8 x 2.5-inch configuration
12 kg (26.5 lb)
4 x 3.5-inch configuration
13.2 kg (29.10 lb)
Processor specifications
Table 16. Dell EMC PowerEdge R340 processor specifications
Supported processor
Number of processors supported
Intel Xeon Scalable Processor
One
PSU specifications
The Dell EMC PowerEdge R340 system supports up to two AC power supply units (PSUs).
Table 17. Dell EMC PowerEdge R340 PSU specifications
PSU
Class
Heat
dissipation
(maximum)
Frequency
Voltage
AC
Current
High line 100–
240 V
Low line 100–
120 V
350 W AC
Platinum
Non-redundant
- 1531 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
350 W
NA
4.8 A–2.4 A
Redundant -
1356 BTU/hr
550 W AC
Platinum
2107 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
550 W
NA
7.4 A–3.7 A
NOTE:
This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 230 V.
Cooling fans specifications
The Dell EMC PowerEdge R340 system supports the following cooling fans.
NOTE:
When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power
consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.
Table 18. Dell EMC PowerEdge R340 fan support matrix
Front storage
PSU type
Fan 1
Fan 2
Fan 3
Fan 4
8 x 2.5-inch
Redundant 350
W
Required, if the PERC
card and/or expansion
riser is installed
Required
Required
Required
4 x 3.5-inch
Technical specifications
113
