User’s
Guide
deliberant
Page
33
Figure 25 – Security: Enterprise WPA/WPA2 Encryption
The properly configured RADIUS server is required for
Enterprise WPA/WPA2
encryption.
Encryption
– specify WPA/WPA2 encryption algorithm:
AES
– AP will accept clients with passphrase encrypted with AES method;
TKIP
– AP will accept clients with passphrase encrypted with TKIP method;
Auto
– AP will accept clients with passphrase encrypted with both: AES and TKIP
methods;
RADIUS authentication settings:
RADIUS IP
– specify the IP address of the authentication RADIUS server where the authentication
requests will be send to.
RADIUS port
– specify the network port used to communicate with the RADIUS authentication server.
Default: 1812 for authentication.
RADIUS key
– specify the secret key of the authentication server [string]. The shared secret is used
to encrypt data packets transmitted between RADIUS server and client.
Shared secrets must be the same on the RADIUS servers and the RADIUS client.
Advanced
Wireless
Settings
Advanced parameters allow configuring the device to get the best performance/capacity of the link.
Figure 26 – Wireless Advanced Settings
Tx power
– set the unit’s transmitting power at which the device will transmit data. The larger the
distance, the higher transmit power is required. To set transmit power level use the slider or enter the
value manually. When entering the transmit power value manually, the slider position will change
according to the entered value. The maximum transmit power level is limited to the allowed value by
country in which device is operating regulatory agency.
