Deliberant DBL2119, User Manual

Page: 32 / 65

31
You don
‟t need to add all MAC address of devices existing in your network to the WDS AP List. The WDS AP List only
needs to specify the MAC address of devices you need to directly connect to.
The bandwidth of the device is limited. Bandwidth will be shared between bridging devices.
WDS Network Topology
In this section, we will demonstrate the WDS network topologies and WDS AP List configuration. You can setup four kinds of
network topologies: bus, star, ring and mesh.
In this case, there are five devices with WDS enabled: WDS1, WDS2, WDS3, WDS4 and WDS5.
Bus topology
Device Entries of WDS AP List
Spanning Tree Protocol
Required
WDS1 The MAC Address of WDS2 No
WDS2 The MAC Addresses of WDS1 and WDS3 No
WDS3 The MAC Addresses of WDS2 and WDS4 No
WDS4 The MAC Addresses of WDS3 and WDS5 No
WDS5 The MAC Address of WDS4 No
Star topology
Device Entries of WDS AP List
Spanning Tree
Protocol Required
WDS1 The MAC Addresses of WDS2, WDS3, WDS4 and
WDS5 No
WDS2 The MAC Address of WDS1 No
WDS3 The MAC Address of WDS1 No