Deliberant APC Propeller 2, Quick Installation Manual

Page: 9 / 16

Quick Installation Guide Installation
deliberant Page 9
LEDs
The APC has 6 green LEDs located on the side panel: Power, LAN and 4 RSSI LEDs
(refer at the
Figure 2
– Overview
for details). The various states of the LEDs indicate
different connection operations as follows:
LED Status Indication
Power On APC is active/working
Off No power on APC
LAN On LAN connection exists.
Blinking Indicates the traffic on LAN interface.
Off No LAN connection.
RSSI (1, 2, 3, 4) On The RSSI level has reached the appropriate
threshold level.
Off The RSSI level has not reached the appropriate
threshold level.
Antenna Polarization
Antenna polarization is a very important consideration when installing an antenna. The
APC Propeller 2 and APC Propeller 5 are integrated with a built in antenna, therefore
the polarizations depends on the mounting position of the device (item 1 in the
Figure 1
– Package Contents
) on the insert bracket (item 2 in the Figure 1
– Package Contents
).
Figure 4
– Vertical and Horizontal Polarization of Main TX/RX Chain