KHCR-B
Mobile Self-Contained Hot and Cold Combination Counters
Model KH2CR-74-B
Shown with option double flip-up sneeze guard,
stainless steel fold-down tray slide and work shelf.
Short Form Specifications
Exterior body
is seamless, one piece molded
fiberglass, having smooth exterior surfaces and
all corners fully rounded. The fiberglass rein-
forced polyester (F.R.P.) is molded with perma-
nent color. Stress points are internally reinforced.
Exterior top
is constructed of 14-gauge stainless
steel, welded, ground and polished into one
integral unit. Top has one to four electrically heat-
ed, recessed, die-stamped stainless steel hot food
warmers. Each warmer accommodates a 12.75” x
20.75” x 6” (32.4cm x 52.7cm x 15.2cm) deep
pan.
Heated food warmers
are constructed of die-
stamped stainless steel. Each heated food warm-
er is individually equipped with a heating ele-
ment rated at 1000 watts for 120 volt or
208/230 volt, 60 Hertz, single phase service
and wired to an adjustable control switch and
indicator light in the control panel. Heated food
warmers are interwired to a maximum 10’ (3m)
long cord with grounded plug for 115 volt or
208/230 volt, 60 Hertz, single phase electrical
service.
The refrigerated cold pan
is 7” (17.8cm) deep
and constructed of stainless steel. The cold pan
is separated from the exterior top by a thermal
break. Copper refrigeration tubing is attached
to the sides and bottom of the cold pan and
is fully insulated with foamed in place polyure-
thane insulation. Cold pan is equipped with a 1”
(2.5cm) I.P.S. drain with a drain valve located
at the bottom of the unit. Temperatures of 33°F
(1°C) to 41°F (5°C) are maintained with pans
recessed 3” (7.6cm) at 86°F ambient room tem-
perature. Pans rest on a stainless steel bracket.
(Pans by others)
Refrigeration system
uses HFC-404A refriger-
ant and has a self-contained 115 volt, 60 Hertz,
single phase hermetically sealed condensing unit
with adjustable cold pan temperature control.
Unit is wired with a 3-wire, grounded, maxi-
mum 10’ (3m) cord and plug. Unit has an on/off
switch for the cold pan mounted on the exterior.
Casters:
Unit is mounted on 5” (12.7cm) diam-
eter swivel casters with non-marking polyolefin
tires and plate brakes. Overall height of caster
assembly is 6.00” (15.2cm).
Optional Accessories &
Modifications
A)
12” (30.5cm) wide stainless steel fold-
down tray slide
C)
10” (25.4cm) wide three bar fold-down
tray slide
D)
10” (25.4cm) wide composite fold-
down cutting board
E)
10” (25.4cm) wide stainless steel fold-
down work shelf
F)
Line-up interlock device
G)
Glass front counter protector
H)
Two tier (H) or three tier (I) display with
stainless steel or glass shelves and sneeze
guards
HD)
Double service two tier display with
sneezeguard
I)
Three tier display with glass shelves and
sneezeguards
J)
12” (30.5cm) wide 18-gauge stainless
steel overshelf
KS)
Single service flip-up sneezeguards
LI)
*Incandescent light fixtures
M)
*Radiant heat lamps
MB)
*Bullet style heat lamps
P)
Open understorage with shelf
Q)
*120V/60Hz/1ø, 15 amp convenience
outlet with 10 amp breaker
QQ)
Drains from food wells, plumbed to
common valve
ST)
Stainless steel trim strips
UU)
Molded fiberglass trim strips
V)
Adjustable stainless steel legs available
in lieu of casters
•
Adapter bars (specify length)
* Inclusion of these options will alter the elec-
trical specifications of the unit
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
