Project ________________________________________
Item Number ___________________________________
Quantity ____________Date_______________________
Approval ______________________________________
The Delfield Company,980 S. Isabella Road, Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2004 The Delfield Company. All rights reserved. Printed in the U.S.A.
SE-ICE/SES-ICE
Mobile Ice Cream Counters
Short Form Specifications
Exterior Body:
Open frame construction with 16-gauge stainless steel corners:
18-gauge stainless steel full bottom shelf and stainless steel C channel front and sides
for optional accent panels.
Exterior Top:
Constructed of 16-gauge stainless steel, welded, ground and polished
into one integral unit. Top is fabricated with square exterior corners. Top has die-
stamped openings, with hinged removable lids. Lids are constructed of stainless steel
and have a rubber gasket seal.
Freezer Compartment:
A water-tight inner liner constructed of 22-gauge stainless
steel, with radius corners and 1.5” (3.8cm) of polyurethane insulation.
Refrigeration:
Copper refrigeration coils are attached to outside of inner liner. Unit
is refrigerated by self-contained, 115 volt, 60 hertz, single phase hermetically sealed
condensing unit with thermostatic control. Unit is wired with a 3-wire, grounded,
maximum 10’ (3m) 120 volt cord and plug.
Casters:
Units are mounted on 5” (12.7cm) diameter swivel casters with non-marking
polyolefin tires and plate brakes. Overall height of caster assembly is 6” (15.2cm).
Optional Accessories and Modifications
SE-A
10" stainless steel fold-down tray slide
SE-D
8” polyethylene fold-down cutting board
SE-E
8” stainless steel fold down work shelf
SE-F
Interlock device
SE-Q
115/15A outlet
SE-U
14"x29" stainless steel end drop shelf
SE-V
Adjustable stainless steel leg
SE-ICE2
Shelleybasic
TM
by Delfield
