Short Form
Specifications
Top
shall be one-piece 18-gauge
stainless steel, with .60" (1.524cm)
overhang around perimeter and die-
stamped 19.87" x 11.87" (50.5 cm
x 30.2 cm) openings with depressed
edges. Formed well below each
opening shall be 6.25" (15.9 cm)
deep. Each well shall have an
individual infinate temperature control
and 1000 watt heating element
attached to bottom of well. Unit is
equipped with .5" drains, (one per
well located in right rear corner
.5" female N.P.T.) manifold and .5"
ball valve. Exterior housing shall be
20-gauge galvanized steel. Unit shall
be insulated on sides and between
wells with 1.00" (2.5 cm) fiberglass;
bottom shall have 2.00" (5.1 cm)
blanket insulation.
Unit shall have all individual controls
wired to a control panel for mounting
in counter or at a remote location; 4'
(1.2 m) length of wiring and conduit
are provided. Unit shall have a three-
wire electrical junction box to allow
hard-wiring at installation.
Optional Accessories and
Modifications:
• Adapter plates and bars
• Single- or double-service flip-up
sneezeguards
• Telescoping covers
• Omit drains and manifold
Drop-In Individually-Controlled Electric Food Wells
Model N8787-D
N8700-D
MODEL COUNTER CUTOUT CONTROL PANEL # OF VOLTS/HERTZ/ SHIP
NUMBER A DIMENSIONS CUTOUT DIMENSIONS FOOD WELLS PHASE AMPS WEIGHT
N8717-D
17.88” (45.4cm) 16.88” X 25” (37.8cm x 58.4cm) 4.62” x 7” (11.7cm x 17.8cm) 1 115/60/1 8.3 39 lbs/ 17 kg
N8731-D
31.75” (80.6cm) 30.75” x 25” (73cm x 58.4cm) 4.62” x 10.31” (11.7cm x 26.2cm) 2 115/60/1 17.0 119 lbs/ 54 kg
N8745-D
45.63” (115.9cm) 44.63” x 25” (108.3cm x 58.4cm) 4.62” x 14.5” (11.7cm x 36.8cm) 3 208-230/60/1 15.7 150 lbs/ 68 kg
N8759-D
59.5” (151.1cm) 58.5” x 25” (143.5cm x 58.4cm) 4.62” x 18.69” (11.7cm x 47.5cm) 4 208-230/60/1 20.9 170 lbs/ 77 kg
N8773-D
73.38” (186.4cm) 72.38” x 25” (178.8cm x 58.4cm) 4.62” x 22.88” (11.7cm x 58.1cm) 5 208-230/60/1 26.1 196 lbs/ 88 kg
N8787-D
87.25” (221.4cm) 86.25” x 25” (214cm x 58.4cm) 4.62” x 27” (11.7cm x 68.6cm) 6 208-230/60/1 31.3 232 lbs/ 104 kg
Mechanical Data — Standard Unit
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT _____________________________________
ITEM NUMBER_________________________________
QUANTITY _______________ DATE________________
APPROVAL____________________________________
NOTE: NOT TO SCALE
NOTE: NOT TO SCALE
6.25"
15.9cm
9.12"
23.16cm
19.87"
50.5cm
24.67"
62.66cm
25.87"
66cm
A
A – 1.20"
A – 3.05cm
NOTE: NOT TO SCALE
11.87"
30.2cm
TYPICAL PLAN VIEW
N8700-D MODELS
TYPICAL ELEVATION VIEW
N8700-D MODELS
RIGHT END VIEW
ALL N8700-D MODELS
