MERIDIAN SERIES
®
SOLID DOOR SHALLOW REACH-IN REFRIGERA
TORS
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Solid Door Shallow Reach-In Refrigerators
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: [email protected]
Approval _________________
Date____________________
MRR1S-S
SPECIFICATIONS
Exterior:
Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be made of aluminum.
Facing of shroud shall be easily removable without the
use of tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments. Unit
will be mounted on 6” (15.24 cm) metal legs.
Doors:
Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing, cam-
lift style hinges. Doors shall be easily removable without
use of tools. Door gaskets shall be magnetic snap-in
style to allow simple replacement. Door handles shall be
recessed.
• Please specify right or left hand hinging at time of
order.
Mechanical controls shall be located behind a removable
shroud facing.
Refrigeration:
Refrigeration system shall use R404A
refrigerant. System shall be completely outside food zone
to maximize internal storage space. System shall utilize
a dual diversion high flow air distribution system, and
shall be a high capacity design. Evaporator coils shall be
coated to prevent corrosion. Cabinet shall maintain 34
0
F
to 40
0
F (1
0
C to 4
0
C) internal temperature.
Single Voltage Models Only:
Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only:
Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase,
and must be hard-wired to the junction box located on
top of the unit.
MODELS:
MRR1S-S
Single section
MRR2S-S
Two section
Full height door
Full height doors
MRR1SR-S
Remote
MRR2SR-S
Remote
MRR1S-SH
Single section
MRR2S-SH
Two section
Half height door
Half height doors
MRR1SR-SH
Remote
MRR2SR-SH
Remote
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with
minimal energy cost
• Easy to read dial thermometer
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb.
capacity. Flexible placement on 1” centers allows
maximum storage
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters
