background image

F5 24” DEEP SEE THROUGH REMOTE DROP IN REFRIGERA

TED DISPLA

Y CASES

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

F5 Serview Drop In

24” Deep See Through Remote Refrigerated Display Cases

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: [email protected]

Approval _________________

Date____________________

F5SR48N

SPECIFICATIONS

Display section exterior sides are made of 18-
gauge stainless steel.  Exterior display section top 
to be 22-gauge galvanized metal.  Interior sides 
are made of .095” thick ABS plastic with molded 
shelf supports.  The interior bottom is constructed 
with stainless steel for long lasting durability.  
Display section is fully insulated with high density 
polyurethane foam between the interior and 
exterior.  (4) Adjustable epoxy coated wire shelves 
are provided for the display section.  An on/off 
switch for the display section light(s) is located at 
the right end of the front facing, above the display 
section doors.

Display case refrigeration system consists of a full-
length top mounted evaporator coil with multiple 
fans circulating the air throughout the cabinet 

utilizing a thermostatic control.  Refrigeration lines are 
piped to a single point connection with expansion valve.   
An ABS plastic drip pan is placed below the coil with a 
clear drain hose for running the condensation to the 
lower base mechanical section.

Front of the display section is equipped with two sliding 
and removable self-closing .50” thick argon filled, low-
e glass doors with a warm edge spacer.   The vertical 
outsides of each door tuck into an extruded channel 
running vertically up each side.  Front and rear nosing 
to be 20-gauge stainless steel.  

Refrigeration system components are HFC-404A.  
Display cabinet blower coil assembly shall have a 
coated evaporator coil and fans.  Interior refrigerated 
base cabinet and display section to maintain 36 to 40 

degree temperatures at 100-degree ambient room 
temperature.  Electrical connections are 115V-60H-
1PH; unit must be hard wired to a junction box.

Back has (1) .62” thick argon filled, low-e glass 
panel.

MODELS:

 

F5SR48N

 

24” Deep Remote Drop In

 

Display Section

 

F5SR72N

 

24” Deep Remote Drop In

 

Display Section

STANDARD FEATURES

•  Display exterior sides are made of 18-gauge stainless 

steel

•  ABS plastic interior sides with molded shelf supports
•  (4) adjustable epoxy coated wire shelves
•  On/off switch for the display section light(s)
•  Top mount coil with multiple fans circulating the air 

throughout the cabinet

•  Display section runs off a thermostatic control
•  Sliding and removable self-closing .50” thick argon 

filled, low-E, warm edge insert, thermopane glass doors 
with left and right vertical gasket

•  High density polyurethane foam throughout unit
•  Three adjustable epoxy coated shelves for each door
•  Environmentally friendly HFC-404A refrigerant

OPTIONS AND ACCESSORIES

 

48” shelf (48” long units only)

 

72” shelf (72” long units only)

 

220 volt/50 cycle - inclusion of this option will 
alter specifications

Reviews: