manualshive.com logo in svg

Delem DA-65W, Reference Manual, Page: 89 / 150

Share
Download
Delem DA-65W Reference Manual Download Page 89

Delem

V0606, 6.11

The other function keys cannot be selected here, until one of these three function keys has been 
chosen. The temporary bar will disappear again.

•

Graphical directory dies

6.l

•

Edit die drawing

When starting the die drawing, the display prompts the main dimensions of the die:

Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H

The height of the tool. Important: this height value will be used in bend depth calcula-
tion.

V-opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

W

The V-opening of the die.

Angle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

α

The angle of the die.

Radius  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RA

The radius of the edges of the V-opening.

Summary of Contents for DA-65W























































































































































Reviews:

No comments