manualshive.com logo in svg

Delem DA-65W, Reference Manual

Share
Download
Delem DA-65W Reference Manual Download Page 56

V0606, 4.6

•

Axis functions

With this command, speed and retraction of the available axes on the machine can be pro-
grammed. This function is machine-dependant. The function is activated by pressing S6 in the 
‘Data edit’ screen:

4.d

A pop-up window appears, in which all programmable dimensions for the axes are shown. 
Which axes are shown here depends on the machine configuration.
Press the ‘END’ button to leave this window.

Axis speeds

Speed of the selected axis in the current bend. Speed can be programmed in a percentage of the 

axis func-
tions

axis functions, to change speed and retract distance of 
available axes in the current bend. This function is 
machine-dependant.

all bends

to the listing of all bends of this program (only possible in 
data-editing).

END

To end the data prep./edit mode and return to the main 
menu. In the dialogue that appears, enter a new product 
number or confirm the existing number.

Function keys:

Summary of Contents for DA-65W























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands