Delem DA-65W, Reference Manual

Page: 48 / 150

V0606, 2.28
computed automatically.
In the second example the complete bend sequence is computed (7 up to 1).
During the computation all assignments are important so you must be sure before starting the
bend order computation that all assignments are set correctly.
• Store
After you have completed the bend sequence a CNC-program can be generated. This generated
program will be stored in the controller program memory.
2.7. Variants programming
The term ‘Variants programming’ means that the operator can make modifications to an exist-
ing program in the graphic menu, without having to build a new CNC program from scratch.
An existing program can be altered without loss of existing corrections and bendsequence. If
such an existing program contains proper axis values and product positions then this informa-
tion can stay intact, only the latest changes (angle, sheet length) are recalculated and entered
into the program.
For instance, when a side length has been altered in the graphical bend overview and the
‘store’ command is given, then a question appears how to compute a CNC program.
2.ad
When update (S4) is chosen, the existing CNC program is changed with regard to modified
values (angle, length), but other values of bend parameters stay the same. The expression ‘re-
use corrections’ refers to the corrections that may have been entered in one of the production
modes. These production modes are explained in chapter 10.
When new (S5) is chosen, a new CNC program is calculated. Corrections in the existing CNC