manualshive.com logo in svg

Delem DA-65W, Reference Manual

Share
Download
Delem DA-65W Reference Manual Download Page 29

Delem

V0606, 2.9

2.j

Specification items:

Radius input:
min. value = 0.1 mm
max. value = 2500.0 mm

In the ‘assignments’ menu, it is possible to modify the way the radius bend is divided into seg-
ments. See section 2.5 for more information.

2.5.

Assignments

Pressing ‘Assignments’ results in the parameter pages.
If Variants programming is active (indication 'Variants On' in the title bar), a warning is given 
that corrections will be lost. Press 'Yes' to proceed with the assignments or 'No' to go back to 
the edit screen.
See section 2.8 for more information about variants progamming.

Automatic bend sequence computation works with several criteria in order to find an optimum 
between a minimum production time, handling possibilities without product/machine and 
product/tool collision.
In order to find one of the optimums you must program several computation parameters with 
which the bend sequence can be computed.
Some of these parameters are machine related, axis speeds a.o. and some are related to han-
dling possibilities and turn times.
There are three screens with parameters for 2D programming.

Summary of Contents for DA-65W























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands