manualshive.com logo in svg

Delem DA-65W, Reference Manual, Page: 124 / 150

Share
Download
Delem DA-65W Reference Manual Download Page 124

V0606, 8.18

The following parameters describe the dimensions of the backgauge and the lay-on positions. 
The number of parameters that has to be programmed depends on the number of gauge 
positions. If more gauge positions are programmed, more parameters are offered. The 
illustration at the bottom of the screen will change according to the number of gauge positions.

Finger height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FH

The height (or thickness) of the first backgauge finger tip.

Gauge height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

H1/H2/H3/H4

The height of the different finger levels.

Finger length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FL

The length of the first finger.

Gauge length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

L2/L3

The length of additional lay-on levels.

8.10. Part support dimensions

If a part support is installed, this page can be used to program the size and place of the part sup-
port units. This page only appears if a part support is installed.

8.s

The part support dimensions are defined as follows:

Summary of Contents for DA-65W























































































































































Reviews:

No comments