Delem DA-65W, Reference Manual, Page: 111 / 150

Delem
V0606, 8.5
The materials are initially listed according to their material number, which is shown in the first
column (ID).
The list can be sorted according to the different properties. If you have a mouse available, click
on the title of a column. The materials will be sorted in ascending or descending order of that
property.
To change an existing material, go to the relevant line and change the values as you see fit. Use
the ENTER key to confirm a typed value.
To delete an existing material, move the cursor to the relevant line and press the function key
‘delete material’ (S6) to erase the values.
To program a new material, move the cursor to an empty space and start programming its val-
ues.
8.4. Program settings
8.e
Machine number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MN =
When there are several bending machines in a factory, it can be useful to give the control
on each machine a unique machine number.
The selected machine number will be stored with the bending program. This number will
be checked when a program is read from floppy or a network. When the machine number
does not match you must confirm to read it anyway or not. If you do not confirm the
delete mate-
rial To delete the material that is currently shown on the
screen.
Function keys