User Manual UX11
7
Preparing the equipment
7.1 Checking the UX11
1
Verify that the UX11 is complete:
• one right wing
• one left wing
• one connecting rod
• one belly plate
• one fuselage
• one Pitot tube
• one battery
• additional batteries and spare parts as needed, depending on the scope and size of the
project.
2
Perform a general inspection of the parts to identify any flaws or mechanical problems that need
attention. Address any issues.
3
Verify the lens of the camera. If required, clean it with the lens cleaning kit.
4
Verify that the two batteries are fully charged. If not, charge the batteries.
7.2 Charging the UX11 battery pack
Use the UX11 charging system to charge and discharge a UX11 battery pack. The charger also includes
an automatic charge-discharge function to recondition your battery when needed.
The flowchart below gives an overview of the different operations.
Delair
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
| www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.
38