Operating the Autoloader: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
file:///T|/htdocs/stor-sys/124T/en/124tvs16/operate.html[12/5/2012 10:25:58 AM]
3. From the
Eject
submenu, scroll to
Tape
→
Mailslot
, and then press
Enter
.
4. Scroll to
By Barcode
.
A bar code label appears.
5. Scroll to the label that corresponds to the cartridge you want to eject. Press
Enter
.
To eject a cartridge by location:
1. From the main menu, scroll to
Commands
, and then press
Enter
.
2. From the
Commands
submenu, scroll to
Eject
, and then press
Enter
.
3. From the
Eject
submenu, scroll to
Tape
→
Mailslot
, and then press
Enter
.
4. Scroll to
By Location
.
Slots that are occupied by a data cartridge are indicated by an asterisk (
*
). A slot assigned for and occupied by a
cleaning cartridge will be indicated by an at sign (@). An empty slot assigned to a cleaning cartridge will be indicated by
an exclamation point (!). Scroll to the slot containing the cartridge you want to eject.
5. Press
Enter
.
The cartridge you want is ejected from the media door (mailslot).
To eject a cartridge from the tape drive:
1. From the main menu, scroll to
Commands
, and then press
Enter
.
2. From the
Commands
submenu, scroll to
Eject
, and then press
Enter
.
3. From the
Eject
submenu, scroll to
Tape
→
Mailslot
, and then press
Enter
.
4. Scroll to
From Drive
, and then press
Enter
.
The cartridge you want is ejected from the media door (mailslot).
Using Magazines and Magazine Blanks
Inward Side of a Magazine
