Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 43

Page: 43 / 155

AUSTROMAT

624 / 644

5. User interface

Operating Instructions (Version 01/2012)

5.1.4.

Alphanumeric keyboard window

The alphanumeric screen keyboard is for entering text such as the names of firing programs.
The keyboard automatically appears when the firing window control expects text to be entered.

Fig. 5-2

Alphanumeric keyboard window

Entering text

•

Enter the desired text.

•

Click [Enter] to close your entry,

•

The alphanumeric keyboard window is closed.

Terminating an entry

•

Click [ESC] to terminate the entry,

•

An entered text is not accepted

•

The alphanumeric keyboard window is closed.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands