background image

Owner’s Manual 

This manual contains important safety instructions for the gasoline engine powered  

lawnmower models: 36B, 36BX, 36H, 36HX, 52H, 52HX 

 

READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY.  

SAVE THIS MANUAL. 

HAVE QUESTIONS OR NEED HELP? 

call 24 hrs / 7-days a week help-line:  [1] 800-393-0668   

or go to  www.DEKPowerUSA.com

 

DO NOT RETURN THIS LAWN MOWER  

TO THE STORE! 

Date of Purchase: 

_______________________ 

Location of Purchase:  

_______________________ 

Serial #  - Mower:  

_______________________ 

Serial # - Engine:  

_______________________ 

Serial # - Transmission 

_______________________ 

Have the following information ready when you call us: 

DEK® is registered trademark of GXi International, LLC   Clayton, NC 27520 USA 

No part of this publication can be printed or copied without written permission. 

Heavy Duty Power Equipment 

®

 

NOTE: 

Mower and engine life are ex-

tended greatly through the use 

of frequent lubrications, oil 

changes and providing routine 

maintenance.  To protect your 

investment, do not forget to 

perform routine maintenance. 

Summary of Contents for 36B






















Reviews: