proxSafe flexx
18
ps_flexx_wi_en
V08/09/09
Note:
Take care, that the backplate is not being bent while fixing the additional screws.
If there is any tension on the backplate and/or other parts of the housing, this may
result in problems when closing the service door or the front door.
3.5
Connect external wall power supply
Attention:
At this point of installation there is a non-connected high voltage cable leading into
the inside of your flexx housing. For safety reasons we recommend to connect the
external power supply cable to the internal power supply unit of your flexx, before
taking any further steps in installation!
1.
Connect the external power supply cable as
shown in the picture above.
Check if the cables for the door grounding
(green/yellow) are still in place.
