9.1 WebConfig
For a detailed description of the configuration parameters please refer to the document
“UDK2/UDK20/UDK800 – deBus Protocol” (which can be obtained on request from your local
sales and service partner or at deister electronic) and the application notes which can be found
at the “deister RFID Portal” (www.deister.com – deister RFID Portal).
The settings regarding EPC Class1 Gen2 transponders refer to the specification of EPCglobal™:
“Specification for RFID Air Interface”.
9.1.1 Summary
This menu shows an example summary of a current reader configuration:
Figure 9.1.1.1: WebConfig – Summary
Device Info
Serial number:
Serial number of device
Device:
Identification code of device
Version:
Firmware version (SW) and hardware version (HW) of device
Region:
Region for which the device is authorized
Hardware configuration:
Hardware configuration code of device
V14/05/09
896108_wi_en_li_udl-250_pro_v130214_io_sk_fh_bf.odt
25
Wiring and Installation UDL 250
