4.3 Tasks
4.3.1 Configure date and time
1. To select the date, use the date selector under
Set date
:
•
• 1. Forward or backward between months.
• 2. Month selected.
• 3. Jump to current date and month.
• 4. Date selected.
2. To select the time, use the time selector under
Set time
:
•
• Click on
hours
,
minutes
, or
seconds
and either:
◦ Enter the value required.
◦ Use the up or down arrow to increase or decrease the time.
3. Select
Write
from the right side panel, to save the settings to the controller.
INFO
To reload the date and time settings from the controller, use
Refresh
.
PPM 300 PICUS manual 4189341080 UK
www.deif.com
Page 40 of 213
