Figure 3.41
Harmonics view
Harmonics menu displays voltage and current harmonics from fundamental component up to 31th harmonic. It is possible to select
whether each component is displayed as Absolute- or Percentage and as primary or secondary amps or per unit values.
PHASORS
Figure 3.42
Phasors sub-menu
Measurement → Phasors
have vector displays for voltage and currents. Also calculated components have own vector displays.
Vectors can be seen in own display and additionally per unit values of measured or calculated components along with secondary
and primary amplitudes are shown. Phasors are handy when it comes to solving incorrect wiring issues.
3.4.7 Measurement menu (MVR-V211)
Measurement menu includes sub-menus for Transformers, Frequency, Current Measurement, Voltage measurement and Phasors
depending of the IED type. Ratio of used current and voltage transformers is defined in Transformers sub-menu. System nominal
OPERATOR'S MANUAL 4189341220A UK
Page 43 of 51
