Degometal GO 3312, Safety Instructions And Directions For Use

Page: 37 / 40

37
www.degometal.com
10. Daily maintenance
In order to maintain the proper working condition of the tool, please check each parts of the tool
regularly. If any parts are worn or damaged, please contact your dealer to purchase a new one or repair
the damaged parts.
11. Safety usage
Very important: in order to ensure electrical safety, avoid injury and fire, please observe the following
safety rules for tool usage.

The tool is designed only for riveting rivet nuts and rivet bolts rather than other purposes like
hammer …etc…

Do not overload the tool; please use it inside specified working scope.

Do not expose the tool to humidity or rain; do not use the tool in humid or high temperature
conditions; do not use it near open fire or flammable materials and gases.

When using the operation hook of the tool, please ensure the tool is hang securely.

When the tool is not used, or in maintenance and repair, please remove the battery.

When the tool is not use, please keep it in package box and store in a dry place and out of the
reach of children.

When using the tool, an operator must wear goggles, helmet, gloves and other necessary
personal protective equipment.

When using the tool, please ensure the vents are not clogged; do not insert anything into the
vents.

Have the tool serviced and repaired by using original parts provided by dealers approved by
Degometal.

Maintenance technicians must be professional; if there are any difficulties, please make sure to
mail it to approved dealers or manufacturer for repair.

No any operations should be done outside the rivet hole after screwing a rivet nut; do not point
the tool to yourself, other or animals.

The tool can prevent a rivet nut from coming out during pre-installation and riveting test to hurt
human beings or animals.
FRAN
CA
IS
EN
GLISH