01.01.2022
ASSEMBLY AND OPERATING MANUAL DEGER D25H, D60H, D80 and D100
Page 8
2
Product description
2.1
Short description of the DEGER systems
The DEGER systems has been designed and dimensioned for use with standard photovoltaic modules. With
its patented control and the patent protected mechanics, the DEGER systems exactly follows the sun at any
time, or, in the case of a cloudy sky, manoeuvres to the point of highest light intensity. The MLD-control is
designed to work with maximum efficiency and to perform only such movements, which will result in an
immediate increase in yield.
2.2
Product identification
The type plate is attached to the rotating head.
2.3
For your safety
2.3.1
Intended use of the DEGER systems
DEGER systems have been designed for the tracking of photovoltaic modules. They are not intended for any
other use, e.g. concentrated modules, use of mirrors or other purposes.
DEGER systems can be used for private or commercial applications. They are suitable for outdoor
installation and building integration.
2.3.2
Personal protective equipment
The customer must provide a sufficient amount of protective equipment for assembly and installation work.
Supervisors must check that this equipment is used.
The following protective equipment is required: The following protective equipment is required:
-
Hard hat
-
Safety shoes
-
Safety gloves
-
When working at heights in excess of 1 m, anti-fall measures and PPE to protect against falling.
-
Any and all safety equipment and standards to be in compliance with Federal, state, and local codes and
OSHA standards
