Page 8
Steam ironing
1. Fill the water reservoir (5) with water.
2. Place the appliance on the steam station
surface (7).
3. Plug in the appliance.
WARNING:
Never direct steam
to clothes on people or garments
on pets.
2. Remove the water reservoir (5) by
pressing the water reservoir removal
latch, positioned under the water
reservoir.
3. Open the water refill lid (6) and fill with
water up to the MAX level.
This appliance is suitable for use
with tap water. If the tap water is
excessively hard, we recommend
the use of a mixture of tap water
and specially formulated distilled
or de-ionised water.
4. Place the water reservoir (5) in its correct
position. A click will be audible when the
water reservoir is seated correctly in
position.
A beeping sound will be audible when the
appliance starts to operate.
– Control panel (10) flashes once and then
goes off.
4. Press the on/off button (11).
Operation of the pump may
make some noise during the
water drawing process; this is
normal.
The appliance starts in Smart-
ECO mode for initial use. This
level offers safe temperature and
steam amounts for all iron able
fabrics.
5. Temperature levels may be set to other
settings beside the Smart - ECO mode by
using the control button (11).
WARNING:
Your selection
should be suited to the fabric that
will be ironed.