Page 10
Cleaning & maintenance
4
WARNING:
Do not soak the
steam station (2) in water or
other liquids. Never put vinegar,
descaling agent, laundry starch,
perfume or other auxiliary
products that help ironing into the
appliance.
WARNING:
Never use gasoline,
solvent and abrasive cleaning
agents or a hard brush to clean
this appliance.
WARNING:
Do not wash the
appliance under running water
and do not soak it in water or
other liquids.
WARNING:
Do not use abrasive
cleaning agents to clean the
soleplate (8).
Replacing the lime collecting cartridge
1. symbol will flash on the control
panel (10) when the cartridge needs to be
replaced.
2. Soak the new cartridge in water for 1
minute in order to enhance its
performance.
3. Before removing the old cartridge from its
slot, make sure that the sections
surrounding the cartridge is cold.
4. Slightly press and release to replace the
cartridge.
WARNING:
Do not use any
descaling agents! They may
damage the appliance.
WARNING:
Do not purchase
cartridge from places other than
the dealers and service centers.
If you do this, the cartridge may
not fit into the cartridge slot and
may not operate. This may cause
a breakdown in the appliance.
Faults arising from using the
incorrect cartridge are not
covered under warranty.
The cartridge must be replaced
after consuming about 30 liters of
water.
5. Remove the new cartridge from its
package, soak it in the water for 1 minute
and push it in its slot.
Cleaning
1. Switch off and unplug the appliance
before each cleaning process.
2. Wait until the iron cools down completely.
3. Use a slightly damp cloth to clean the
outer surface of the iron, then wait until the
iron dries completely.
4. Wipe the sediments and residues on the
soleplate with a slightly damp cloth and soft,
nonabrasive liquid cleaner as necessary.