MAINTENANCE NOTICE
IT-TDFX-222
Revision 0
Page 10/16
October 2008
1.9
REASSEMBLING THE BUTTERFLY VALVE:
This operation is carried out in the reverse order to disassembly. The following guidelines
should, however, be followed:
Apply a suitable grease to the guides of the butterfly disc [8], the ½ bodies [9] and the
seal [7].
Keep the butterfly disc [7] in a closed position while tightening the ½ bodies in order
to properly centre the seal [7].
1.10
ASSEMBLING THE VALVE AND THE OPERATING SYSTEM:
This operation is also carried out in the reverse order to disassembly. The following
guidelines should be followed for the automatic system:
Do not forget to fit the position pointer [45] and in particular to check the N.C or N.O valve
operating position (position of drive squares).
Before making the final network connections, check that the valve is operating normally.
If you encounter problems when carrying out the operations described below, do not
hesitate to contact us.
NOTE:
We also remain at your disposal to maintain your valves either on-site or at our
own premises.
NOTE !
