6
7
Mythos Two, Mythos Three, Mythos Eight and Mythos Ten Loudspeakers
each come with a custom designed wall mounting bracket and wall template
that makes secure mounting a breeze.
It is recommended that Mythos Three be installed horizontally and Mythos
Two be installed vertically, while Mythos Eight and Ten can be used either
vertically (as mains or surrounds) or horizontally (as a high performance cen-
ter channel speaker). See the next section to see how to install the Mythos
Eight and Ten Logo Badge depending on speaker alignment.
The rear panel of each speaker features threaded inserts for the adjustable
Mounting Screws (included). These Mounting Screws then fit easily into the
Keyhole Slots on the Wall Mounting Bracket, also included. Follow these
directions for installing the Wall Mounting Bracket.
• Use the Mounting Template (included) to help you judge speaker
placement. Make certain the locations you have selected for wall-
mounting do not conceal electrical wiring or plumbing. Make sure
the speaker clears the ceiling, adjacent walls, corners, beams, lighting
fixtures and door/windowframes. Leave at least 1
1
/
2
” above the
speaker location to allow the speaker to slide down onto its bracket.
Mythos Two features a solid Tempered Glass Base for stable
table-top positioning. Follow these directions for securely
mounting the Tempered Glass Base.
Attach Speaker to Glass Base:
1. For easy installation, turn
speaker upside down.
2. Place the silver bottom pad (A)
over the screw holes on the bottom
of the speaker, and place the glass
base (B) over the silver pad (A),
lining up the screw holes.
3. Line up the Cap Screws (C) with
the screw holes in the glass base (B),
inserting them through the silver pad
(A), and into the bottom of the speaker.
4. Secure assembly to Speaker by
tightening the four Cap Screws (C)
firmly using the Hex Key. Do not
overtighten.
5. Turn assembly right-side-up.
Wall Mounting Speakers Using The Mythos Bracket
A
B
C
Mythos Two: Table-Top Mounting Using Glass
