IMPORTANT!
Please read the following instructions carefully before installing your key safe. Always wear goggles or other suitable
eye protection before starting to drill.
CONTENTS
1 x Key Safe
1 x TPU cover to protect and disguise your key safe
1 x Instructions
4 x Thunderbolts for securely fixing your key safe
BEFORE INSTALLING THE KEY SAFE
Select your own combination for the key safe.
Each number in a combination can only be used once.
It is recommended that you do not use a number combination that can be easily guessed. Avoid numbers linked to your telephone number
or birthday. Do not use a bank card PIN number as this may breach your financial security should someone determine the combination to
your key safe. Use a unique number that only you will know between four and six numbers inclusive.
Record it on the Combination Protector Card included; this should be safely stored so that in the unlikely event that you forget your
combination it can be located and used to access your keys.
WARNING:
Please note that if you forget your combination gaining access to your key safe is not covered by your warranty. There are no
master codes so the ONLY way to open the key safe is by using suitable tools and brute force.
There are no user serviceable parts so under no circumstances should you remove the screws on the inside cover of the lid.
Your warranty will be void if this cover is tampered with or opened.
SETTING YOUR COMBINATION
PUSH BUTTON KEY SAFE
Heavy Duty Push Button Key Storage Product Code: HA00006
defendersecurityproducts.co.uk
1 x Combination Protector Card with instructions
1 x Combination Setting Key
YOUR KEY SAFE
On the front of the key safe there are 10 buttons numbered 1 to 0. There is also an ‘open’ slide catch and a C (cancel) button.
The key safe is shipped from the factory without a preset combination.
This means that the ‘open’ slide catch will open the key safe
without any number buttons being pressed.
NOTE:
The key safe will not open if any of the numbers have been pressed.
When a number button is pressed, it will remain down. This allows the user to visibly check if the correct combination has been entered.
Once the key safe is opened, the number buttons will reset into the original position.
If a button is pressed accidentally or incorrectly, slide the C (cancel) button down. This clears the memory and resets all the number buttons
to their original position.
Step 1:
To set the combination for the first time, slide the C (cancel) button down to clear the memory
and reset the number buttons. Slide down the ‘open’ button and pull open the lid. The top of the
key safe is conveniently hinged, take care so that the key safe door doesn’t close on your fingers.
Step 2:
There are 10 metal dials numbered 1 to 0 with red arrow indicators on the key safe door.
There is no preset combination so all the red arrows should be facing towards the word RESET.
NOTE
: these numbers correspond to the numbered buttons on the front of the lid.
Step 3:
Using the Combination Setting Key provided, set each digit of your combination. To do this, simply
place the Combination Setting Key into the metal dial and apply light pressure and rotate 180°.
You should be able to feel the dial click into place. The red arrow should now be facing towards
the word SET. Repeat for each number in your combination.
DO NOT CLOSE THE KEY SAFE DOOR UNTIL YOU HAVE TESTED THE COMBINATION!
See below for TESTING YOUR COMBINATION.
Metal Dial
Turn 180° so that the red
arrow points towards SET
Scan the QR Code to watch our code setting
video or find it on our youtube channel at:
youtube.com/solonsecurity
