16
4.3 Basic Operations
The basic user’s operations after he/she has logged into the system are described as below:
REC
(Mouse:
)
Press this button to force manual recording. To stop manual recording, press it again.
All cameras will be recorded as if the scheduled record is A/V, and
will be shown
on the lower-right corner of the screen if manual recording is ON.
Alarm Reset
(Mouse:
)
Press this button to cancel alarm activation, i.e. reset the alarm outputs and silence the
buzzer.
Vol+/-, MUTE
(Mouse:
)
Press these buttons to control the volume.
X2
(Mouse:
)
In full screen display, press this button to enter Digital Zoom mode. Please refer to
for the detailed operations in Digital Zoom mode.
SEQ
(Mouse:
)
Press this button to switch to or return from SEQ display mode. In SEQ display mode,
each page in the sequence will be shown for the preset page dwelling time sequentially.
When the SEQ starts/ends, the SEQ icon
/
will be displayed in the upper
right corner of the screen for about three seconds.
(Mouse:
)
Press these buttons to circulate up/down among the available split-window displays.
SEARCH
(Mouse:
)
(Administrator/Supervisor)
In split-window display, press this button to display the search menus. The system will
remember the last one the user chose.
Mouse Left click
Select the focus window in the split-window display. The border color of the focus
camera will change accordingly.
Summary of Contents for 16-CH
Page 77: ...77 Edge ...
Page 78: ...78 ...
Page 79: ...79 ...
Page 102: ... 102 7 Set Time Based Refresh 8 Click on OK button to save the settings ...
