DEEP SEA 6110
HOW TO PERFORM A MANUAL
OFF LOAD
TEST
1. Turn
Breaker
on the Generator to
OFF
position
2. Press Manual Mode button on display
ONCE
only
Page 1: ...DEEP SEA 6110 HOW TO PERFORM A MANUAL OFF LOAD TEST 1 Turn Breaker on the Generator to OFF position 2 Press Manual Mode button on display ONCE only ...
Page 2: ...S GREEN Start Button for Approx 2 seconds Engine will start up and begin the OFF load test Close generator door until the 5 minute test is over 4 c If Engine fails to start check screen for any faults check fuel level clear faults using reference manual if possible 4 d Repeat steps 4 a 4 b ...
Page 3: ...wer continuity Systems 0845 055 8455 Mobile Numbers 07770 236866 07903227774 5 a Run Engine for approximately 5 Minutes This is the OFF load Generator TEST 5 b Press RED OFF ONCE Button to STOP engine 5 c Press Auto Button ONCE and check Auto LED is illuminated ...
Page 4: ...DEEP SEA 6110 6 Check Display Reads Auto Mode 7 When the OFF Load test in Complete Turn the Breaker on the Generator back to ON position ...