background image

18

SR 130

29/05/06 - 300009755-001-H

Warranty certificate

Date of purchase: .............................................................................

Name and address of the purchaser: ...............................................

..........................................................................................................
..........................................................................................................
..........................................................................................................
..........................................................................................................
..........................................................................................................

Tel.:...................................................................................................

Information on the appliance (to be found on the rating plate):

Model: ...............................................................................................
Serial number: ..................................................................................

Retailer's stamp:

Summary of Contents for SR 130





















Reviews: