5.3
Activating holiday programs for all zones
If you go on holiday, the room temperature and domestic hot water
temperature can be reduced to save energy. With the following procedure
you can activate the holiday mode for all zones and domestic hot water
temperature.
1. Select the tile [ ].
2. Press the button to confirm the selection.
The Holiday Mode menu opens.
3. Use the rotary knob to select Start date holiday.
4. Press the button to confirm the selection.
The current date is displayed as start date of your holiday.
5. Change the start date, if necessary.
6. Press the button to confirm the selection.
7. Use the rotary knob to select End date holiday.
8. Press the button to confirm the selection.
The day after the start date of your holiday is displayed.
9. Change the end date, if necessary.
10. Press the button to confirm the selection.
11. Use the rotary knob to select Wished room zone temperature on
holiday period.
12. Press the button to confirm the selection.
The room temperature for the holiday period is displayed.
13. Change the temperature, if necessary.
14. Press the button to confirm the selection.
You can reset or cancel the holiday program by selecting Reset in the
holiday mode menu.
5.4
Heating circuit configuration
For every heating circuit there is a quick user settings menu available.
Select the heating circuit you want to configure by selecting the tile [ ],
[ ], [ ], [ ], [ ], [ ] or [ ]
Tab.5
Menu to configure a heating circuit
Icon
Menu
Function
Scheduling
Set the scheduling mode and choose a timer program already created
Manual
Set the manual mode; the room temperature setpoint is set to a fixed setting
Short temperature change
Set the temporary mode; the room temperature setpoint is changed tempora
rily
Holiday
Set the start and end date of your holiday to lower the room temperature set
point.
Antifrost
Set the frost protection mode; the minimum room temperature protects your
system from freezing
Set Heating Activity Temperatures
Set the room temperature setpoint for each activity of the timer program.
See: Timer program to control the room temperature, page 18
Zone configuration
Access the settings for the configuration of the heating circuit.
Tab.6
Extended menu to configure a heating circuit Zone configuration
Menu
Function
Short temperature change
Change the room temperature temporarily, if required
OperatingZoneMode
Select the heating operating mode: Scheduling, Manual or Antifrost
Manu ZoneRoomTempSet
Set the room temperature manually to a fixed setting
Heating Schedule
Create a timer program (up to 3 programs allowed). See: Creating a timer
Set Heating Activity Temperatures
Set the room temperature for each activity of the timer program
ZoneTimeProg Select
Select a timer program (3 options)
5 Settings
16
DIEMATIC Evolution - C140
7745361 - v02 - 15062020
