3. Use the rotary knob to select the desired operating mode:
Tab.10 DHW operating modes
Icon
Mode
Description
Scheduling
The domestic hot water temperature is controlled by a timer program
Manual
The domestic hot water temperature is set to a fixed setting
Hot water boost
The domestic hot water temperature is increased temporarily
Holiday
The domestic hot water temperature is reduced during your holiday to save
energy
Antifrost
Protect the boiler and installation from freezing in winter
4. Press the button to confirm the selection.
5.6.2
Timer program to control the DHW temperature
Creating a timer program
A timer program allows you to vary the domestic hot water temperature
per hour and per day. The hot water temperature is linked to the activity of
the timer program.
Important
You can create up to three timer programs. For example, you can
create a program for a week with normal working hours and a
programme for a week when you are at home most of the time.
1. Select the tile [ ].
2. Press the button to confirm the selection.
3. Use the rotary knob to select Zone configuration.
4. Press the button to confirm the selection.
5. Use the rotary knob to select DHW Schedule.
6. Use the rotary knob to select the timer program you want to modify:
Schedule 1, Schedule 2 or Schedule 3.
7. Press the button to confirm the selection.
Activities scheduled for Monday are displayed. The last scheduled
activity of a day is active until the first activity of the next day. The
scheduled activities are shown. At initial start-up, all weekdays have
two standard activities; Comfort starting at 6:00 and Reduced
starting at 22:00.
8. Use the rotary knob to select the weekday you want to modify.
A Weekday
B Overview of scheduled activities
C List of actions
9. Perform the following actions, if necessary:
9.1. Edit the start time and/or activity of a scheduled activity.
9.2. Add a new activity.
9.3. Delete a scheduled activity (select the activity Delete).
9.4. Copy the scheduled activities of the weekday to other days.
9.5. Change the temperature linked to an activity.
Activating a DHW timer program
In order to use a DHW timer program, it is necessary to activate the
operating mode Scheduling. This activation is done separately for each
zone.
1. Select the tile [ ].
2. Press the button to confirm the selection.
3. Use the rotary knob to select Scheduling.
4. Press the button to confirm the selection.
5. Use the rotary knob to select the DHW timer program Schedule 1,
Schedule 2 or Schedule 3.
6. Press the button to confirm the selection.
Fig.13
Weekday
AD-3001384-01
........ .......
..... ... ....... ....
....... ...........
.... ...... ....
.... ......
.....
...
11:20
..:.. ........ ....
..:.. ........ ....
................
..............
A
B
C
5 Settings
7745361 - v03 - 29112021
DIEMATIC Evolution - C140
19
