1. Press the two keys
f
simultaneously and then key
[+]
until the
symbol
-
flashes on the menu bar.
2. Select the fitter menu using the
®
key.
c0de
appears on the
display.
3. Use keys
[-]
or
[+]
to input the installer code
0012
.
4. Confirm using key
S
.
p[001
is displayed with
1
flashing.
5. Press the
S
key a second time. The value
75
°C appears and
flashes (for example).
6. Change the value by pressing the
[-]
or
[+]
key. In this example
using key
[-]
to
60
°C.
7. Confirm the value with the
S
key:
p[001
is displayed with
1
flashing.
8. If necessary, set other parameters by selecting them using the
[-]
or
[+]
keys.
9. Press the
j
key 2 times to return to the current operating mode.
The boiler also returns to operating status if no keys are
pressed for 3 minutes.
5.4.5.
Setting the maximum heat input for central
heating operation
The speed can be changed using parameter
p17
. To do this,
proceed as follows:
1. Press the two keys
f
simultaneously and then key
[+]
until the
symbol
-
flashes on the menu bar.
2. Select the installers menu using the key
S
.
c0de
appears
on the display.
3. Use keys
[-]
or
[+]
to input the installer code
0012
.
4. Confirm using key
S
.
p[1
is displayed with
1
flashing.
5. Press the
[+]
key to go to parameter
p[17
.
6. Confirm using key
S
.
7. Press the
[+]
key to increase the speed from
46
to, for example,
50
(see the graphs for the associated heat output).
8. Confirm the value with the
S
key.
9. Press the
j
key 2 times to return to the current operating mode.
C003059-A
h
j
-
3x
2x
C003060-A
3x
...x
...x
2x
-
h
j
5. Commissioning
IniControl For C 330 / C 630 ECO
25
260216 - 7600717-001-06