2. Select the desired operating mode using the selector:
Tab.17
Operating mode
Description
Programming
The room temperature is modulated according to the timer programme chosen.
The domestic hot water is produced according to the timer programme chosen.
Recommended mode.
Manual
The room temperature is constant.
The domestic hot water temperature remains at the comfort temperature permanently.
Temporary temperature change
The room temperature is forced for a defined period.
The production of domestic hot water is forced at the comfort temperature for a defined
period.
Holiday
The room temperature is reduced during an absence period to save energy.
The domestic hot water temperature is reduced during an absence period to save ener
gy.
Frost protection
The installation and equipment are protected against frost during the winter period.
3. Select: Confirm, to save the new operating mode.
4. Go back to the main screen by pressing the back key .
6.3
Managing the central heating
6.3.1
Switching the central heating on/off
The heating function can be switched off for all circuits.
This can lead to energy savings, for example, during the summer period.
1. Go to the menu: Central heating On/Off.
Tab.18
Type of access
Access path
Direct access: from the main home screen
→ Press the selector
→ Select: Central heating On/Off
Quick access: from any screen
→ Press the key
→ Select: Central heating On/Off
2. Select the desired value:
Off to stop the heating function.
On to switch the heating function on again.
3. Select: Confirm, to save the setting.
4. Go back to the main screen by pressing the back key .
6.3.2
Changing the room temperature temporarily (override)
Regardless of the operating mode selected for a zone, it is possible to modify the room temperature for a defined period. Once
this time has elapsed, the selected operating mode will restart.
1. Go to the menu:
Temporary heating temperature change.
Tab.19
Type of access
Access path
Direct access: from the main home screen
Not available
Quick access: from any screen
→ Press the key
→ Select:
Temporary heating temperature change
2. Select the required zone:
Zone1
Zone2 (only if the optional PCB is connected)
3. Set the temperature using the selector.
4. Set the override end time using the selector.
5. Select: Confirmto confirm the override.
6 Settings
7740570 - v04 - 03112022
CFU
19
