4
TRIO DT 250 - TRIO DT 350
16/07/2015 - 300028005-001-04
1.2 Recommendations
.
Heating water and domestic water must not
come into contact with each other. The
circulation of drinking water must not be done in
the exchanger but only in the tank.
Insulate the pipes to reduce heat losses to a
minimum.
Only remove the casing for maintenance and repair
operations. Put the casing back in place after
maintenance and repair operations.
We recommend installing an EC175 package on the
collector sensor.
The installation must comply in all matters to the
standards and rules which govern the work and
interventions in individual and collective homes, and
other constructions.
France
: DTU 65.12, NF P50-601, NF 12976-2.
Service the appliance regularly to ensure that it operates
correctly. Contact a qualified professional or take out a
maintenance contract for the annual servicing of the
appliance.
As the heat transporting fluid leaks much more easily than
water, carry out a visual check on the tightness of all
fittings and gaskets after a few hours' operation at normal
operating pressure.
To take advantage of the guarantee, no modifications
must be made to the appliance. The choice of
components for the solar system and their installation
must follow the instructions in this manual.
Never remove or cover labels and rating plates
affixed to the appliance. Labels and rating plates
must be legible throughout the entire lifetime of the
appliance. Immediately replace damaged or illegible
instruction or safety labels.
1.3 Liabilities
1.3.1
Manufacturer's liability
Our products are manufactured in compliance with the
requirements of the various applicable European
Directives. They are therefore delivered with
1
marking
and all relevant documentation.
In the interest of customers, we are continuously
endeavouring to make improvements in product quality.
All the specifications stated in this document are therefore
subject to change without notice.
Our liability as the manufacturer may not be invoked in
the following cases:
`
Failure to abide by the instructions on installing the
appliance
`
Failure to abide by the instructions on using the
appliance
`
Faulty or insufficient maintenance of the appliance
1.3.2
Installer's liability
The installer is responsible for the installation and
commissioning of the appliance. The installer is required
to observe the following instructions:
`
Read and follow the instructions given in the
manuals provided with the appliance
`
Install the appliance in acordance with the legislation
and standards currently in force
`
Perform the initial start up and carry out any checks
necessary
`
Explain the installation to the user
`
If a maintenance is necessary, warn the user of the
obligation to check the appliance and maintain it in
good working order
`
Give all the instruction manuals to the user
